When you are suffering from sleep apnea, a change in the sleep pattern is very essential to your health. You can not only get disrupted sleep but also have obstructive sleep apnea. If you don't get sufficient oxygen in the airway, this will result in various health problems such as an increase in blood pressure and increased stress levels. So, when you think of getting the best treatment for your condition, you must understand how do CPAP machines work. This article would be very helpful for you.

The micro CPAP snoring device works on the principle of pushing air through your airway by passing it over a compressed gas such as nitrogen, liquid petroleum gas, or a carbon dioxide cartridge. The airway is restricted while your breath is being swept away by the machine. This results in the restriction of airflow into the airway. This causes the soft tissue in the airway to vibrate as the air comes in contact with it. This vibration results in increased airway pressure and hence reduced chances of obstructive sleep apnea.

Get Rid of Obstructive Snoring:

The CPAP machine helps you get rid of obstructive snoring by increasing the pressure in the airway. The higher the pressure in the air, the lower the chances of blockage in the airway while sleeping. The higher the pressure in the air, the greater the chances of the air flowing in the airway and the fewer chances of it vibrating. The increased air pressure reduces airway sensitivity.

How Does Micro CPAP Machine Work?

The mechanism of how do micro CPAP machines work is explained below. The machine consists of a small and lightweight CPAP unit that is placed right behind your nose. It looks like a mask, which is connected to tubing and fitted just on top of the mask. The device is attached to the mask by a hose.

The machine reduces your pressure in the air with the help of a motor. This motor is powered by compressed gas. It pushes air from the tank of the machine directly into your airway. This reduces the pressure in the air, which reduces the chances of blockage in the airway while sleeping. The machine works just like other CPAP machines. The only difference is that in this type of machine, there is no direct electricity provided to the mask.

The machine works just like other CPAP machines in that the mask is placed on your face and the air is passed through it. The only difference here is that there is no direct power supply provided to the mask or CPAP unit. This reduces the risk of electrical problems and mains failure. This also means reduced maintenance costs.

The machine is Durable:

You need to clean the mask periodically and the machine may need some servicing occasionally. The machine is quite durable despite its small size. The durability factor is largely dependent on the quality of materials used in making the machine. The materials need to be well-assembled so that the machine can function smoothly without any technical issues. If you are using an older model CPAP machine, then it will likely have a complex mechanism that needs proper maintenance and servicing.

Reduces Air Pressure:

The answer to the question, How do micro CPAP machines work? is that the machine works as it is supposed to. It reduces air pressure in your mouth ensuring better breathing. Maintenance is required for this CPAP machine but it is not that difficult.

The CPAP machine has been designed to improve airway restriction in patients with sleep apnea. It helps to eliminate the obstruction by trapping air between the teeth at various locations of the head and neck. The mechanism is very effective and is therefore prescribed widely by doctors. However, you must follow the guidelines carefully to avoid complications.